Silver Travertine - Split Face

Sally Prittie

Q :I've never used split tile before, can a 305x305 be cut down? Is it tricky to get a straight edge that way? Thanks.

A :Hello Sally These are natural stone tiles therefore, if the correct cutting tools are used then they are not any harder to work with than regular stone tiles. We hope this is helpful.

Simon

Q :How thick are these tiles? Thanks

A :Hello Simon, Split Face tiles are distinctive and unique in that they have varying thickness of small tiles glued together to make up the overall tile therefore, the thickness of tiles can vary between 8 to 12 mm and sometimes a little bit more. Hope this is helpful.

Sonia Khambatta

Q :HI Would these be ok in a bathroom on walls that wouldn't get wet ? Thanks Sonia

A :Hello, Thank you for your question. Yes these tiles are for interior use, we kindly recommend using a waterproof membrane if used in a wet room to avoid water danage to the walls. Many thanks.

Allison Rainford

Q :I have dual aspect integrated log fire. At present the chimney breast plaster is cracking with the heat generated. Do these tiles withstand heat. If not , could you recommend any that do. Many thanks Allison Rainford

A :Hello, Thank you for your question. The tiles can be used around a log burner, however we wouldn't recommend any of our tiles in our listings to be exposed to direct heat. Many thanks.

Tony

Q :Do these tiles come toothed out for adjoining tile as per sample. Also what size is each tile ?

A :Hello Tony Yes, the split face products do come as to slot into each other as seen with our sample. the overall size of the tile is 305mm x 305 mm We hope this is helpful information.

Clare McWilliam

Q :Hi what weight are these tiles ?

A :Hello Ms McWilliam Thank you for your interest in our product and we hope you are well. The information about the weight of each section of split face tiles is not something that is usually available from our suppliers as each individual tile with the smaller sections always include varying sizes of depth. We can only provide a rough estimate between 28-38kg per m2. Hope this is helpful in some way. Stay safe and well.

John Walker

Q :Can this product be used in a wet room or shower enclosure?

A :Hello, Thank you for your question. Unfortunately we would not recommend split faces to be used in a wet room, due to not being able to grout the split face water will seek through and bacteria can build up, even if a waterproof membrane is used it is still not suitable for a wet room.